Javascript required
Skip to content Skip to sidebar Skip to footer
Home / Ribbon Weave Baby Quilt With 2.5 Inch Strips

Ribbon Weave Baby Quilt With 2.5 Inch Strips

Download Article

Download Article

If you've mastered a basic 3-strand braid and want a bit of a challenge, add an extra strand! Once you get the hang of working with 4 strands of yarn, ribbon, or leather, you'll be surprised at how easy it is to create a complex-looking braid. Make a flat or round 4-strand braid in several colors and then wrap it around your wrist to make a completely unique bracelet.

  1. 1

    Cut 4 equal strands of cord or yarn. Wrap a fabric measuring tape around your wrist and make a note of the measurement. Then, cut 4 strands of cord or yarn that are about 2 inches (5.1 cm) longer than that distance. This will account for weaving and tying off the ends of the bracelet.If you're braiding thin thread, you may want to use 2 or 3 strands for each main strand of the braid.

    It may be easier to learn to braid with at least 2 different colors. Once you become more familiar with making 4-strand braids, you could use just 1 color.

  2. 2

    Tie 1 end of the strands together and tape them to a flat work surface. Gather the 4 strands together into a knot about 1 inch (2.5 cm) from 1 end. Lay the strands flat on a table and put a piece of tape across the end to hold the yarn in place. Then, separate the strands so they fan away from each other.[1]

    • If you don't want to tape the yarn, try pinning the strands of yarn in place. This would work best if you were working on a flat cork or bulletin board.

    Advertisement

  3. 3

    Braid the outer strands towards the center. Take the rightmost strand of yarn and bring it over the strand that's next to it. Pinch the 2 middle strands together and bring the leftmost strand of yarn over them.[2]

    • Keep the tension tight as you braid so your bracelet doesn't unravel.

  4. 4

    Bring the right strand over 1 and lift the leftmost strand over 2 strands. Repeat what you just did while keeping the tension on the strands tight so the braids are visible. Move the rightmost strand over the strand that's next to it and then pinch the 2 middle strands together. Then, take the leftmost strand and bring it over them.[3]

    • Try to remember that you're working over a single strand from the right and over a double strand when you braid from the left.

  5. 5

    Keep braiding the outermost strands until you reach the end of your yarn. You can stop braiding when you're about 1 inch (2.5 cm) from the bottom. Try to keep the tension the same as you work from the top of the yarn to the bottom. For example, don't start really tight and then become loose as you reach the end of the yarn or your bracelet will be uneven.[4]

  6. 6

    Tie the bottom end of the braid. Once you're about 1 inch (2.5 cm) from the end of the yarn, stop braiding and pinch the strands of yarn together. Tie the yarn into a strong knot. Then, remove the tape from the top end of the braid.[5]

    • Leave the excess yarn that's sticking out from the ends so you can tie the braid into a bracelet.

  7. 7

    Wrap the braid around your wrist and tie the ends together. Since it can be tricky to tie a knot using 1 hand, ask a friend to knot the ends together for you. If you have a long bracelet, you may be able to tie a knot at the ends before sliding it onto your wrist.[6]

    • If you make an extra-large bracelet, you can wear it as an anklet.

    Advertisement

  1. 1

    Cut 4 strands of cord, leather, or thick yarn into equal lengths. Wrap a flexible measuring tape around your wrist and add at least 2 inches (5.1 cm) to the measurement. Then, cut your firm material, such as cord or leather, into 4 equal pieces according to the new measurement.[7]

    • Although you can use a thick yarn, your round bracelet won't be as sturdy as a bracelet made with leather or cord.

    Tip: Consider using at least 2 different colors when you're starting out. This will allow you to easily see which strands you're working with.

  2. 2

    Gather 1 end of the strands in a knot and tie it to your work surface. Hold the 4 pieces near 1 end and tie a knot about 1 inch (2.5 cm) from the end. Then, lay the knot on the table and place a piece of tape over it so the knot doesn't slide around. Separate the 4 strands so they fan out and away from each other.[8]

    • If you're using 2 colors, alternate the colors when you arrange the strands.

  3. 3

    Wrap the left strand around and through the 2 middle strands. Take the leftmost strand and bring it underneath the 2 middle strands. Take it up and then down between the 2 strands.[9]

    • Tug on the strands as you work so the tension shapes the round braid.

  4. 4

    Wrap the right strand around and between the 2 middle strands. At this point, you'll have 4 strands in front of you, but you'll see a slight twist near the top of the middle 2. Take the rightmost strand and wrap it underneath these 2 middle strands. Bring it around and then down between them.[10]

    • You may want to hold the 2 middle strands in place with your non-dominant hand and use your dominant hand to hold the working strand.

  5. 5

    Continue to braid with the leftmost and rightmost strands. To form the round braid, keep bringing an outer strand under and around the middle strands and tug tightly once you've wrapped it. Braid until you're about 1 inch (2.5 cm) from the bottom of the strands.[11]

    • Remember to alternate braiding the leftmost and rightmost strands so your braid doesn't become lopsided.

  6. 6

    Make a knot when you reach the end and tie the bracelet around your wrist. Make the knot at least 1 inch (2.5 cm) away from the bottom of the strands. Then, peel the braid off of the tape and wrap it around your wrist. Tie a knot using both ends of the braid so it doesn't slide off of your wrist.

    • If you can't tie the bracelet yourself, ask a friend to help you or tie it before you slide it onto your wrist.

    Advertisement

Add New Question

  • Question

    What is a 4-strand braid?

    wikiHow Staff Editor

    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

    wikiHow Staff Editor

    wikiHow Staff Editor

    Staff Answer

    Support wikiHow by unlocking this staff-researched answer.

    As the name suggests, 4-strand braid works similarly to a classic 3-strand braid, except that you are working with 4 strands. The outer right strands are woven over and under the strands next to them, going from right to left, and the outer left strands are woven under and then under the strands to the right of them. This pattern repeats until the braid is complete.

  • Question

    How do you make a 4-strand chevron bracelet?

    wikiHow Staff Editor

    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

    wikiHow Staff Editor

    wikiHow Staff Editor

    Staff Answer

    Support wikiHow by unlocking this staff-researched answer.

    Choose 4 separate colors of thread, then cut the threads to the desired length. Fold them over in the middle and knot the strings together at the top (where you made the fold). Spread the strands out so that the colors mirror each other in a 4 3 2 1 1 2 3 4 pattern. Make a series of knots, moving from the outer strand on one side to the middle, then repeating this process on the other side, and finally knotting the 2 middle strands together. Continue doing this down the length of the threads until your bracelet is as long as you like, then tie off the ends.

  • Question

    How do you make a 4-wire braid?

    wikiHow Staff Editor

    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

    wikiHow Staff Editor

    wikiHow Staff Editor

    Staff Answer

    Support wikiHow by unlocking this staff-researched answer.

    You can braid the wires the same way you would with strands of yarn, but you'll need to use more force to bend them into the shape you want. Make sure you secure the strands together on one end (e.g., by twisting them together or clamping them in place) so that your wires stay lined up correctly.

  • Question

    If I don't have thread, can I use yarn?

    Community Answer

    Yes, yarn makes the bracelet thicker and softer to wear.

  • Question

    Will it look good with four colors (one color for each strand) instead of two?

    Community Answer

    Yes, you can make it with 4 different colors as long as you think those 4 colors look good together. For instance, as a Christmas present, you can use red, green, gold, and white or silver. 4 shades of the same color also look great together.

  • Question

    How can I keep the strands tight so that the design isn't loose when I weave the bracelet?

    Community Answer

    After a few strands, pull the strands at the end.

  • Question

    Do I repeat the steps over and over until I like it?

    Community Answer

    Repeat steps 4 and 5 until you reach your desired length. Then end the bracelet with a knot or add a clasp.

  • Question

    What type of string should I use?

    Community Answer

    Colored hemp rope is recommended because it has a sturdier material and doesn't unravel unlike yarn does.

  • Question

    Can I use satin ribbon, even if it is a little wide?

    Community Answer

    I wouldn't recommend it because the satin might not tie together as thick as you'd like, but it doesn't hurt to try it.

  • Question

    How can I wear the bracelet if it has no lock?

    Community Answer

    You have to tie it onto your wrist or your ankle using both ends of the material. I recommend a slip knot.

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Video

  • Try decorating your bracelet by inserting beads onto the strands.

  • Make bracelets in several colors or choose 1 for a monochrome look.

Thanks for submitting a tip for review!

Advertisement

Things You'll Need

  • Yarn in different colors
  • Tape
  • Scissors
  • Measuring tape
  • Cord, leather, or thick yarn in different colors
  • Tape
  • Scissors
  • Measuring tape

About This Article

Article Summary X

To make a flat 4-strand braided bracelet, start by measuring your wrist and cutting 4 equal strands of yarn that are 2 inches longer than your wrist circumference. Next, gather the strands together about 1 inch from the end and tape them to a flat work surface. Then, take the rightmost strand of yarn and bring it over the strand that's next to it. Pinch the 2 middle strands together and bring the leftmost strand of yarn over them. Be sure to keep the tension tight as you braid! Keep braiding until you're about 1 inch from the end. Finally, pinch the strands of yarn together and tie them in knot to complete the bracelet. For tips on making a round 4-strand braided bracelet, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 630,004 times.

Did this article help you?

Ribbon Weave Baby Quilt With 2.5 Inch Strips

Source: https://www.wikihow.com/Make-a-4-Strand-Braided-Bracelet